manualshive.com logo in svg

HP 2133, Справочное руководство

Поделиться
Скачать
HP 2133 Скачать руководство пользователя страница 132

Reference Information

Reference Guide

7–23

Canada

This digital apparatus does not exceed the Class B limits for 
radio noise emissions from digital apparatus as set out in 
the radio interference regulations of the Canadian Department 
of Communications. This equipment meets the applicable 
Industry Canada technical specifications.

The Ringer Equivalence Number, REN, is an indication of the 
maximum number of devices allowed to be connected to a 
telephone interface. The termination on an interface may consist 
of any combination of devices subject only to the requirement 
that the sum of the RENs of all devices does not exceed five (5.0). 
The REN for this terminal equipment is 1.0. 

The internal wireless radio complies with RSS 210 of Industry 
Canada. To prevent radio interference to the licensed service, this 
device is intended to be operated indoors and away from windows 
to provide maximum shielding. Equipment (or its transmit 
antenna) that is installed outdoors is subject to licensing.

Declaration of Conformity (U.S.A.)

Responsible Party:

Hewlett-Packard Company
Manager of Corporate Product Regulations
3000 Hanover Street
Palo Alto, CA 94304
+1 (650) 857-1501 

declares that the product(s)

Trade name:

Hewlett-Packard Company

Regulatory Model 
Number:

CRVSA-02T1-75
CRVSA-02T1-90

Complies with Part 15 of the FCC Rules. Operation is subject to the 
following 2 conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including 

interference that may cause undesired operation.

319954-001.book  Page 23  Thursday, February 3, 2005  3:03 PM

Содержание 2133






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды