background image

4–10

Reference Guide

Modem and Network Connections

4. Type a name for the new network.

5. If you want to use encrypted communication, clear the 

automatic key option, then select the following parameters:

Key: ASCII passphrase or hexadecimal key string.

Key format: ASCII for passphrase, hexadecimal for key 
string.

Key length: smaller number for 64-bit encryption, larger 
number for 128-bit.

6. Select the option to make this a notebook-to-notebook 

(ad hoc) network.

7. Select OK to save the configuration. This network is added to 

your list of preferred networks and becomes available to other 
notebooks.

To Turn Wireless Communication On and Off

Wireless networks and cellular modems are examples of devices 
that use wireless communication. Such devices may be restricted 
in some situations or environments, such as when traveling in an 
airplane. If in doubt, be sure to ask for authorization 

before

 

turning on your notebook wireless networking. 

In Italy, Singapore, and possibly other countries, you may be 
required to purchase a license before using the wireless function.

319954-001.book  Page 10  Thursday, February 3, 2005  3:03 PM

Содержание 2133






















































































































































Отзывы: