HP 2133 Скачать руководство пользователя страница 49

Страница: 49 / 149

Battery Packs and Power Management

Reference Guide

3–7

■

To preserve the life of a battery pack, be sure to charge it
regularly.

■

If the notebook will be unused and unplugged for more than
2 weeks, remove and store the battery pack.

To prevent damage to the battery pack, do not expose it to
high temperatures for extended periods of time.

■

High temperatures accelerate the self-discharge rate of a
stored battery pack. To prolong the charge of a stored battery
pack, place it in a cool, dry location.

■

To maintain the accuracy of battery charge displays, calibrate
a battery pack that has been stored for one month or more
before using it.

■

Avoid using or charging battery packs at high temperatures.

319954-001.book Page 7 Thursday, February 3, 2005 3:03 PM

Содержание 2133






















































































































































Результаты поиска

Содержание 2133

Отзывы:

Бренды по названию

Популярные бренды

HP 2133, Справочное руководство

Результаты поиска

Содержание 2133

Отзывы:

Бренды по названию

Популярные бренды