manualshive.com logo in svg

HP 2133, Справочное руководство

Поделиться
Скачать
HP 2133 Скачать руководство пользователя страница 127

7–18

Reference Guide

Reference Information

Laser Safety

The CD-ROM and DVD drives used with the notebook are 
certified as a Class 1 laser devices according to the U.S. 
Department of Health and Human Services (DHHS) 
Radiation Performance Standard and International Standards 
IEC 825/IEC 825-1 (EN60825/EN60825-1). These devices are 
not considered harmful, but the following precautions are 
recommended:

■

Ensure proper use by reading and following the instructions 
carefully.

■

If the unit requires service, contact an authorized service 
center.

■

Do not attempt to make any adjustment of the unit.

■

Avoid direct exposure to the laser beam. Do not open 
the unit.

LED Safety

The infrared port located on the front of certain models is 
classified as a Class 1 LED (light-emitting diode) device 
according to International Standard IEC 825-1 (EN60825-1). 
This device is not considered harmful, but the following 
precautions are recommended:

■

If the unit requires service, contact an authorized service 
center.

■

Do not attempt to make any adjustment of the unit.

319954-001.book  Page 18  Thursday, February 3, 2005  3:03 PM

Содержание 2133






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды