Media card reader board
Description
Spare part number
Media card reader board (includes cable)
730897-001
Before removing the media card reader board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 40
), and then remove the following components:
a.
Service door (see
Service door on page 41
)
b.
Display assembly (see
Display assembly on page 53
)
c.
Bottom cover (see
Bottom cover on page 61
)
Remove the media card reader board:
1.
Release the ZIF connector
(1)
to which the media card reader board cable is attached, and then
disconnect the media card reader board cable from the system board.
2.
Remove the Phillips PM2.0×4.5 screw
(2)
that secures the media card reader board to the
top cover.
3.
Remove the media card reader board
(3)
and cable.
Reverse this procedure to install the media card reader board.
Component replacement procedures
67
Содержание 210 G1
Страница 4: ...iv Important Notice about Customer Self Repair Parts ...
Страница 6: ...vi Safety warning notice ...
Страница 10: ...x ...
Страница 26: ...16 Chapter 3 Illustrated parts catalog ...