HP 1x1x16 - IP Console Switch KVM, Руководство пользователя

Страница: 58 / 339

Managing KVM console switches 58
2.
Modify the entry as needed.
3.
Click OK to save the changes.
To delete a trap destination:
1.
Select an entry in the Trap Destinations list, and click Delete. You are prompted to confirm the
deletion.
2.
Click Yes to confirm the deletion.
Configuring a cascade switch connection
1.
Select the Cascade Switches category.
2.
Click the Cascade Switch dropdown list next to the ID column, select the cascade switch you want to
configure, and select the console switch type you want to assign.
If the console switch is not in the dropdown list, add a console switch to the Existing Cascade
Switches list by clicking Add. The Add Console Switch dialog box appears.
a.
Enter the name of the console switch, and select the console switch type from the list.
b.
Click OK to add the console switch. The console switch is now in the Existing Switches list and in
the Cascade Switches dropdown list.
3.
Repeat step 2 for each interface adapter.
4.
When finished, click Apply>OK to save the new settings.
-or-
Click
Cancel to close without saving.
Configuring trap parameters
An SNMP trap is a notification sent by the console switch to a management station to indicate that an
unusual event has occurred in the switch that might demand further attention. You can specify what SNMP
traps are sent to the management stations by clearing or selecting the appropriate checkboxes in the list
(the SNMP Authentication Failure Trap is not selected by default).
When you select the Traps category for the first time, the Manage Console Switch window retrieves and
displays a list of SNMP traps from the console switch. You can select Enable All or Disable All to easily
select or clear the entire list.
NOTE: The CPQKVM.MIB file is provided on the HP IP Console Viewer CD to be used with HP
Systems Insight Manager or other SNMP management stations to properly receive SNMP
traps.