HP 170X - JetDirect Print Server, Руководство по установке и настройке

Страница: 61 / 80

General HP JetDirect Messages 55
PRINTER TYPE CENTRONICS indicates a standard parallel
connection that transfers data in one direction
only (to the printer).
BITRONICS indicates a parallel connection that
supports bidirectional communications.
ECP indicates a bidirectional parallel connection
(IEEE-1284) that supports an enhanced
capabilities port.
DISCONNECTED indicates that no printer is
attached to the port or the printer is not
turned on.
PRINT SERVER
NOT DEFINED
The file server does not have a print server
object that corresponds to the NetWare node
name. Use printer installation software or
PCONSOLE to create the print server object.
When the HP JetDirect print server is
configured for multiple file servers, the error is
only displayed on the configuration page if
none of the file servers made the connection.
PSERVER CLOSED
CONNECTION
The print server requested a termination of the
connection with the HP JetDirect print server.
No error exists or is indicated. Make sure the
print server is running, and restart it if
necessary.
Table 7-2 General HP JetDirect Messages
Message
Description
READY The HP JetDirect print server has successfully
connected to the server and is awaiting data.
RECEIVE BUFFER
ERROR
Run the power-on self-test: turn the printer
off, then on again. If the error persists, call the
HP‘s Customer Care In-Country Numbers (see
Chapter 1 for telephone numbers).
RETRY ERROR Verify that the Ethernet network cable is
correctly terminated on both ends. Make sure
your HP JetDirect print server is correctly
attached to your network.
SECURITY
EQUIVALENCE
NOT SET
The security equivalences for your print server
are not set up properly. Reconfigure your print
server.
SQE ERROR Run the power-on self-test: turn the printer
off, then on again. If the error persists, call the
HP‘s Customer Care In-Country Numbers (see
Chapter 1 for telephone numbers).
TFTP IN
PROGRESS
The HP JetDirect print server is currently in the
process of obtaining its basic IP configuration
information through TFTP and has not detected
any errors.
TFTP LOCAL
ERROR
The TFTP transfer of the configuration file from
the host to the HP JetDirect print server failed
with the local print server encountering some
form of inactivity timeout, or excessive
retransmissions situation.
Table 7-2 General HP JetDirect Messages
Message
Description