Viewing the Embedded Web Server
29
Viewing the Embedded Web Server
Before you can use the embedded web server, the
print server must be configured with an IP address.
There are many ways to configure an IP address on
the print server. For example, you can
automatically
configure IP parameters over the network using BootP
(Bootstrap Protocol) or DHCP (Dynamic Host
Configuration Protocol) each time the printer is turned
on. Or, you can
manually
configure IP parameters
using the printers control panel (for selected printers),
Telnet, HP Web JetAdmin or other management
software.
If the print server does not receive its IP configuration
within two minutes, a default IP address is
automatically assigned: 192.0.0.192. This address is
not a valid IP address for your network but can be
used to initially access the print server. However, to
use the default IP address, you must temporarily set
up your system with the same IP
network number
or
establish a route to it.
After an IP address is established on the print server,
perform the following steps:
1
Run a supported version of your web browser.
2
Enter the IP address of the print server as the URL (the
one displayed in the following screenshot is an exam-
ple only).
3
The HP JetDirect main web page will be displayed.
4
Click the
?
icon on the web page for more infor-
mation.
Changes to the IP address and other parameters will
close the connection to the embedded web server. To
re-establish a connection, use the new IP address.
Содержание 170X - JetDirect Print Server
