HP 170X - JetDirect Print Server, Руководство по установке и настройке

Страница: 60 / 80

54 CHAPTER 7: HP JETDIRECT CONFIGURATION PAGE MESSAGES
PARALLEL
PORT 1
CENTRONICS indicates a standard parallel
connection that transfers data in one direction
only (to the printer).
BITRONICS indicates a parallel connection that
supports bidirectional communications.
MLC, ECP2/MLC, ECP2/1284.3, 1284.3,
ECP2/1284.4, 1284.4 indicates a bidirectional
parallel connection (IEEE-1284) that supports
an enhanced capabilities port.
DISCONNECTED indicates that no printer is
attached to the port or the printer is not
turned on.
PASSWORD
ERROR
The HP JetDirect print server detected that the
password for the NetWare print server object is
wrong. Use the PCONSOLE utility to erase the
password for the print server object. When the
HP JetDirect print server logs on again, it sets a
new password.
When multiple file servers are configured, the
error is only displayed on the configuration
page if none of the file servers are connected.
Table 7-2 General HP JetDirect Messages
Message
Description
PORT SELECT:
DISCONNECTED
The port on the card that was automatically
sensed as having the cable attached. The -M
indicates that switch settings on the
10/100Base-TX MIO card were set manually.
No cable detected.
PRINTER
NUMBER IN USE
The printer number assigned to the printer is
already in use by another printer. Rerun the
printer installation software and assign an
unused printer number. This may also occur
when a printer is power cycled, in which case
the error goes away after the print server times
out and detects the lost connection.
PRINTER
NUMBER NOT
DEFINED
The printer number you assigned to the
remote printer has not been defined. Assign a
valid printer number to the HP JetDirect print
server, or run PCONSOLE and define this
printer number for the print server.
Table 7-2 General HP JetDirect Messages
Message
Description