manualshive.com logo in svg

HP Enterprise ProLiant DL380, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Enterprise ProLiant DL380 Скачать руководство пользователя страница 82

Diagnostic tools

Product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the 

Hewlett Packard Enterprise website

.

UEFI System Utilities

The UEFI System Utilities is embedded in the system ROM. Its features enable you to perform a wide range
of configuration activities, including:

• Configuring system devices and installed options.
• Enabling and disabling system features.
• Displaying system information.
• Selecting the primary boot controller or partition.
• Configuring memory options.
• Launching other preboot environments.

HPE servers with UEFI can provide:

• Support for boot partitions larger than 2.2 TB. Such configurations could previously only be used for boot

drives when using RAID solutions.

• Secure Boot that enables the system firmware, option card firmware, operating systems, and software

collaborate to enhance platform security.

• UEFI Graphical User Interface (GUI)
• An Embedded UEFI Shell that provides a preboot environment for running scripts and tools.
• Boot support for option cards that only support a UEFI option ROM.

Selecting the boot mode

This server provides two 

Boot Mode

 configurations: UEFI Mode and Legacy BIOS Mode. Certain boot

options require that you select a specific boot mode. By default, the boot mode is set to 

UEFI Mode

. The

system must boot in 

UEFI Mode

 to use certain options, including:

• Secure Boot, UEFI Optimized Boot, Generic USB Boot, IPv6 PXE Boot, iSCSI Boot, and Boot from URL
• Fibre Channel/FCoE Scan Policy

NOTE:

The boot mode you use must match the operating system installation. If not, changing the boot mode
can impact the ability of the server to boot to the installed operating system.

Prerequisite

When booting to 

UEFI Mode

, leave 

UEFI Optimized Boot

 enabled.

Procedure

1.

From the 

System Utilities

 screen, select 

System Configuration

 > 

BIOS/Platform Configuration

(RBSU)

 > 

Boot Options

 > 

Boot Mode

.

2.

Select a setting.

82

 Diagnostic tools

Содержание ProLiant DL380







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды