HP Enterprise ProLiant DL380, Руководство по техническому обслуживанию и ремонту

Страница: 68 / 134

To replace the component, reverse the removal procedure.
Removing and replacing a rear serial port interface (tertiary
riser)
Procedure
1. Power down the server ( Power down the server on page 36).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack ( Extend the server from the rack on page 37).
• Remove the server from the rack ( Remove the server from the rack on page 37).
4. Remove the access panel ( Remove the access panel on page 39).
5. Disconnect the cable.
6. Remove the tertiary riser cage.
7. Using a T-10 Torx screwdriver, remove the serial port interface.
68 Removing and replacing a rear serial port interface (tertiary riser)