manualshive.com logo in svg

HP Enterprise ProLiant DL380, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Enterprise ProLiant DL380 Скачать руководство пользователя страница 59

Removing and replacing the 8-SFF drive backplane

Procedure

1.

Power down the server (

Power down the server 

on page 36).

2.

Remove all power:

a.

Disconnect each power cord from the power source.

b.

Disconnect each power cord from the server.

3.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

 on page 37).

• Remove the server from the rack (

Remove the server from the rack

 on page 37).

4.

Remove the access panel (

Remove the access panel

 on page 39).

5.

Remove the fan cage (

Removing and replacing the fan cage

 on page 52).

6.

Remove all drives (

Removing and replacing drives

 on page 40).

7.

Remove the 8 SFF drive cage (

Removing and replacing the 8-SFF drive cage

 on page 58).

8.

Remove the drive backplane.

To replace the component, reverse the removal procedure.

Removing and replacing the 2-SFF front drive cage

Procedure

1.

Power down the server (

Power down the server 

on page 36).

2.

Remove all power:

a.

Disconnect each power cord from the power source.

b.

Disconnect each power cord from the server.

3.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

 on page 37).

• Remove the server from the rack (

Remove the server from the rack

 on page 37).

4.

Remove the access panel (

Remove the access panel

 on page 39).

5.

Remove all drives (

Removing and replacing drives

 on page 40).

6.

Disconnect all cables from the drive backplane.

7.

Remove the drive cage.

Removing and replacing the 8-SFF drive backplane

59

Содержание ProLiant DL380







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды