40
The important information as following:
MCU version
: CPU firmware version
APP Version
: The current firmware version.
System power
: The device current operation voltage.
Phone NO.
: Device ID actually.
I/O status
:Check the I/O electrical level status.
1
is high,
0
(lower than 3V) is low. You can check after
device had connected an I/O device, such as, a panic button.
G-
sensor
: It shows the G-sensor value. Move the MDVR check if this value is changing.
GPS info
: It will show as
GPS[*N] + Location
data,
N
is satellite numbers, more than 3 is normal.
No work
: there is no GPS signal.
None/Not exist
:GPS module is not detected by device.Please restart device or update firmware to try.
Click
NEXT
, it will display the Net information
In the info2 interface :
Net linked
: Show the current connection method :
Inner WIF
I (the device is linking with WIFI) ,
3G
( the device is linking with 3G).
Wired
(the device is linking by net cable)
