Hoval Max-3 plus Series, Техническая информация и инструкции по сборке

Страница: 39 / 60

39 4 214 283 / 00
OVERVIEW OF SETTINGS
• Motor
Keep the burner motor clean and dry. Any deposits
of dust or lint should be blown out occasionally. On
motors provided with oiling holes, a few drops of high
quality SAE 20 oil should be injected every six months.
Surplus lubricant spreading from the bearings should
be wiped away. Some motors have sealed-for-life bea-
rings; these require no maintenance.
• Fan Runner
Keep the fan blades clean and free from oil and build up
of dust or deposits picked up from a dusty boilerhouse.
• Oil Strainer/Filter
Replace filter element annually.
• Nozzles, Flame Plate and Electrodes
Maintenance by the boiler operator is usually limited to
checking the condition of these items only whilst the
boiler door is open. Servicing the oil or gas nozzle,
which may require dismantling, and replacement of
parts should be left to the service engineer.
The boiler operator may wipe off deposits of soot and
disturb the parts. Check the electrodes are set correct-
ly after referring to the burner manufacturers manual.
• Flame Sensor
-
violet cell for gas or photo-electric cell for oil with me-
thylated spirit on a lint free cloth. Do not handle window
NOTE:
-
ing to remove the burner inner assembly.