Hoval CompactGas, Техническая информация и инструкции по сборке

Страница: 13 / 38

13 4 214 864 / 02
ASSEMbly
2.4.2 Installation of side shutters
This cladding shutter system is used to cover the gap
between the boiler door and the side wall, whereby the
shutter must be able to swing outward.
A
B
C
D
Fig. 14
1. On the boiler door hinge side, mount one hinge (26)
each at the top and bottom of the front side wall using
4 self-tapping screws Ø 3.5 x 9.5.
- 45° facets of the hinge must point towards the boiler.
2. Install the side shutter (27) on the two hinges (26) so
that the side shutter can be moved (see detail A and B):
- Install the side shutter to the outer hinge half using
one Phillips screw (28) and one spacer sleeve (29)
each.
- Secure the Phillips screw (28) by means of two
countered hexagon nuts (30) to prevent it from be-
ing pulled out. Do not clamp hinges!
A
26
28
29
30
45° facets on boiler
side
Fig. 15
45° facets on boiler
side
26
28
29
30
27
B
Fig. 16
3. Install one magnet (31) each on the top and bottom
hole of the movable side shutter using a hexagon nut
(32), washer (33) and hexagon screw (34) M4 x 10
(see detail C).
34 33 32 31
C
Fig. 17
4. Open boiler door.
5. On the swivelling side of the boiler door, mount one
hinge (35) each at the top and bottom of the front side
wall using 4 self-tapping screws Ø 3.5 x 9.5.
- 45° facets of the hinge must point towards the boiler.
6. Install the side shutter (36) on the two hinges (35) us-
ing two Phillips screws (37), spacer sleeves (38) and
hexagons nuts (39) each (see detail D).
45° facets
on boiler
side
27
D
26
28
29
30
Fig. 18