HouseWarmer HW075DVN-1, Инструкция по установке и руководство пользователя

Страница: 12 / 28

Page 12 21091-0-0606
Use a jigsaw to cut the holes out of the wall and discard the inner
circle debris. The wall is now prepared for the installation of the
unit.
Using four (4) wood screws, attach the wall mounting bracket to the
wall.
If installing onto drywall, anchors may need to be used.
Note:
See instruction sheet to install air inlet gasket ring.
Wall Mounting
Bracket
Line up the two (2) screws in the top of the mounting bracket with the
holes in the back of the unit. Slide the back of the unit onto the screws
attaching the back of the unit to the wall.
Back of
Unit
Holes
Secure the back of the unit into place using two (2) wing nuts and
washers.
Wall Mounting
Bracket
Back of
Unit
Wing Nut