13
89212070-18
Pre
ss
ure
Nozzle
Coupler
Collar
Operations
STEP 1:
Attach a 5/8" water supply
hose to inlet connector. Minimum
flow should be 5 GPM depending
on model of machine. Do not
exceed 65 psi incoming water
pressure.
STEP 4:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. The end
with the longest shroud or bend
restrictor is attached to spray gun.
STEP 7:
Check oil level by using
supplied dip-stick. Use SAE 10W-
40 non-detergent only.
STEP 2:
Attach high pressure hose
to discharge nipple using quick
coupler. Lock coupler securely by
pulling back coupler collar,
inserting onto discharge nipple and
pushing collar forward until secure.
STEP 5:
Before installing nozzle,
turn on water supply and run
machine allowing water to flush
through the system until clear. Pull
the spring-loaded collar of the wand
coupler collar back to insert your
choice of pressure nozzle.
CAUTION: Never replace nozzles
without engaging the safety latch
on the spray gun trigger.
STEP 8:
Fill fuel oil tank. Do not
confuse gasoline and fuel oil tanks.
Keep proper fuel in proper tank.
STEP 3
:
Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage.
S
TEP 6:
Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B
COLD W
ATER INLE
T
INGRES
O DEL
AG
UA
F
RíA
ADMIS
SION D
’EA
U F
ROI
D
9.80
0-02
0.0
Garden
Ho
s
e
Water
Inlet
High
Pre
ss
ure
Ho
s
e
Di
s
charge
Nipple
Collar
Trigger
Gun
Wand
Safety Latch
Coupler
Collar
Pre
ss
ure
Nozzle
Dip
s
tick
Y
AS
FU
NCIONAND
O
S E
XP
OS
ÉE
S
S B
LE
SSU
RE
S
AP
PAREIL EST EN OP
ÉR
ATION
Fuel Oil
Tank
Pre
ss
ure
Nozzle
Coupler
Collar
High
Pre
ss
ure
Ho
s
e
Spray Gun
Shroud