HOTSY • 900-1400 • 9.803-325.0-B OPERATOR MANUAL • GAS FIRED
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
16
INSTALLATION INSTRUCTIONS
The gas pressure coming out of the regulator and going
to the burner ring has been factory set for elevations of
0 to 2000 ft. Altitudes greater than 2000 ft will require
adjustments to the gas manifold pressures. Consult
your local service dealer/distributor for high altitude
adjustments. In Canada, certification for installation
at altitudes over 4500 feet above sea level is the juris
-
diction of local authorities. You should not readjust the
burner ring gas pressure. If you replace your gas valve,
you will need to adjust the new valve. Refer to your
machine’s
specification plate
for the correct pressure
setting. Follow the installation and adjustment instruc
-
tions provided with your replacement valve.
NOTE:
Air for combustion and ventilation along with
exhaust flue sizing must conform to methods outlined
in current American Standard (ANSI-Z223.1) National
Fuel Gas Code or National Standard of Canada CSA-
149.1 and CSA-149.2 “Installation Code for Gas Burn-
ing Appliances”.
