background image

HOTSY •  900-1400 •  9.803-325.0-B  OPERATOR MANUAL • GAS FIRED

OPERA

TOR’S MANU

AL

  

PRESSURE 

W

ASHER  

8

INTRODUCTION & IMPORTANT SAFETY INFORMATION

Thank you for purchasing this Pressure Washer. 
We reserve the right to make changes at any time 
without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understand-
ing of the manufacturer’s operating instructions and 
warnings before using this pressure washer. Warning 
information should be emphasized and understood. 

If the operator is not fluent in English, the manufac

-

turer’s instructions and warnings shall be read to and 
discussed with the operator in the operator’s native 

language by the purchaser/owner, making sure that 

the operator comprehends its contents.
Owner and/or user must study and maintain for future 
reference the manufacturers’ instructions.
The operator must know how to stop the machine 
quickly and understand the operation of all controls. 
Never permit anyone to operate the engine without 
proper instructions.

SAVE THESE INSTRUCTIONS

This manual should be considered a permanent 
part of the machine and should remain with it if 
machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement parts.
This machine is to be used only by trained operators.

IMPORTANT SAFETY 

INFORMATION

WARNING: If you do not follow these instructions 

exactly, a fire or explosion may result, causing 
property damage, personal injury or loss of life.

WARNING: To reduce the risk of 
injury, read operating instruc-
tions carefully before using.

  1.  Read  the  owner's  manual 

thoroughly. Failure to follow 
instructions and warnings 
could cause malfunction of 
the machine and result in 

death,  serious  bodily  injury 

and/or property damage.

  2.  Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

  3.  Stay alert — watch what you are doing.

  4.  Use  only  your  hand  to  push  in  or  turn  the  gas 

control knob. Never use a tool. If the knob will not 

push in or turn by hand, don't try to repair it; call 

a qualified service technician.

READ OPERATOR’S 

MANUAL THOROUGHLY 

PRIOR TO USE.

  5. All installations must comply with local codes. 

Contact your electrician, plumber, utility company 

or the selling distributor for specific details.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of electro-
cution. Check with a qualified electrician or service 
personnel if you are in doubt as to whether the 
outlet is properly grounded. 

WARNING: Keep wand, hose, 
and water spray away from 
electric wiring or fatal electric 
shock may result.

6.     To protect the operator from 

electrical shock, the machine 

must be electrically ground-
ed. It is the responsibility  
of the owner to connect this

   machine to a grounded receptacle of proper 

voltage and amperage ratings. Do not spray 
water on or near electrical components.  
Do not touch machine with wet hands or while 
standing in water. Always disconnect power  
before servicing.

RISK OF EXPLOSION:  

IF GAS SMELL PRESENT 

TURN OFF SUPPLY

WARNING

WARNING: Flammable liquids 

can create fumes which can 
ignite, causing property dam-
age or severe injury.
WARNING: Risk of explosion — 
Operate only where open flame 
or torch is permitted.

 

Do not 

spray flammable liquids.

RISK OF FIRE.  

DO NOT ADD FUEL 

WHEN OPERATING 

MACHINE.

WARNING

WARNING: Risk of fire — Do not 

change LP tanks when the 
product is operating or still hot. 
WARNING: Use vapor fuel only.

7.   Gas appliances shall be 

installed only in locations 
where combustible dusts and 
flammable gases or vapors 
are not present. Do not store 
or use gasoline near this 
machine.

WARNING: In the event of a pilot outage, wait 
at least five minutes to clear out any gas before 
relighting.

  8.  Keep operating area clear of all persons.

WARNING

KEEP WATER 

SPRAY AWAY FROM 

ELECTRICAL WIRING.

Содержание 1400 GAS-FIRED SERIES





























Отзывы: