background image

Page 3

To reduCe THe rIsK of InJury

• 

The water in the spa should never exceed 104°F (40°c). Water 
temperatures between 100°F and 104°F (36°c and 40°c) are 
considered safe for a healthy adult. lower water temperatures are 
recommended for extended use (exceeding ten minutes) and for 
young children. extended use can cause hyperthermia.  

• 

Pregnant or possibly pregnant women should limit spa water 
temperatures to 100°F (36°c). Failure to do so may result in 
permanent injury to your baby.

• 

do not use spa immediately following strenuous exercise.

avoIdInG THe rIsK of sKIn burns

• 

To reduce the risk of injury, before entering a spa the user should 
measure the water temperature with an accurate thermometer.

• 

Test the water with your hand before entering the spa to be sure it’s 
comfortable.

safeTy sIGn

each Hot Spring 

®

 spa is shipped with a SAFeTy SIgN in the owner’s 

package. The sign, which is required as a condition of Product listing, 
should be permanently installed where it is visible to the users of the 
spa. To obtain additional SAFeTy SIgNS, contact your Hot Spring 
dealer and request Part #70798.

Safety Information

SAVe THeSe INSTRucTIoNS

IMPORTANT  
SPA INSTRUCTIONS

The following contains important spa information, and we strongly 
encourage you to read and apply them.

do:

• 

use and lock the vinyl cover when the spa is not in use, whether it is 
empty or full.

• 

Follow the Spa care and Maintenance recommendations stated in this 
manual.

• 

use only approved accessories and recommended spa chemicals and 
cleaners.

don'T  

• 

leave the Hot Spring spa exposed to the sun without water or the cover 
in place. exposure to direct sunlight can cause solar distress of the 
shell material.

• 

Roll or slide the spa on its side. This will damage the siding.

• 

lift or drag the vinyl cover by using the cover lock straps; always lift or 
carry the cover by using the handles.

• 

Attempt to open the electrical control box. There are no user 
serviceable parts inside. opening of the control box by the spa owner 
will void the warranty. If you have an operational problem, carefully go 
through the steps outlined in the Troubleshooting section. If you are not 
able to resolve the problem, contact your authorized Hot Spring dealer. 
Many problems can easily be diagnosed over the telephone by an 
Authorized Service Technician.

Содержание ARIA AR













































Отзывы: