HotSpring ARIA AR, Руководство пользователя

Страница: 18 / 44

SUMMER TIMER
your Hot Spring spa is equipped with a summer timer. The summer
timer can be activated during extremely hot summer months to
maintain water temperatures. Activating the summer timer causes the
heater to immediately shut down. The circulation pump will remain on
for approximately 5 minutes pushing water through the heater to cool
it down. Both heater and circulation pump will then remain off for eight
hours. The summer time icon will be displayed on the main control
panel and will remain displayed for as long as the summer mode is on.
The circulation pump and heater will automatically shut down for the
same eight hours every day until the summer timer is deactivated. It is
recommended to activate the summer timer in the morning so that the
spa is off during the hottest part of the day and so that the circulation
pump will start up again in the evening when you are ready to enjoy the
spa again.
ImporTanT: The Summer timer will not lower the spa’s water
temperature below the ambient air temperature. Ambient conditions,
including humidity, wind and shading will affect your spa water
temperature.
To activate the Summer timer, simply follow these steps:
•
Press the oPTIoNS Hard button on the Main control panel.
•
Press the soft button next to set up .
•
Press the soft button next to summer
timer to activate. The yellow Summer
timer icon will light up when activated.
ImporTanT: If water temperature falls
below 80°F (26.7°c) the summer timer
will automatically be disabled.
•
The Summer timer should
be deactivated when cooler
temperatures return. To do this, simply repeat last 3 steps. The yellow
Summer timer icon will turn off.
lANgUAgE
The main control panel screen can be viewed in five different
languages. The languages are english, French, german, dutch, and
Spanish. To change languages:
•
Press the oPTIoNS hard button on the Main control panel.
•
Press the soft button next to set-up .
•
Press the soft button next to
language until the desired language
is visible.
ImporTanT: Should you accidently
change the language screen into a
language you don't know, simply
repeat the previous steps where
Set-up is in the top right corner and language is in the lower right
corner.
Page 15
operating Instructions
BRIghTNESS
If you would like to change the brightness of the main control panel
screen:
•
Press the oPTIoNS hard button on the Main control panel.
•
Press the soft button next to set-up .
•
Press the soft button next to brightness to lower the brightness
from 7 down to 1.
ImporTanT: Pressing the Brightness soft button at number 1 will
increase the screen brightness back to 7.
AUdIO (OPTIONAl)
If audio is installed both the Home screen and the options screen will
display the Audio function.
To enter the Audio menu screen:
•
Press the soft button next to audio .
•
Press the soft button next to audio
again to turn the Sound System on
or off.
ImporTanT: Audio must be oN to
scroll to next function.
• Press the soft button next to ▲ or ▼
to change the volume level.
ImporTanT: The spa amp must have
an audio source that is on to hear the
audio through the spa speakers. If the
TV and icast are on at the same time,
the TV audio will override the icast.
•
Press the soft button next to
function: volume to go to eQ Boost.
•
Press the soft buttons next ot oN or
oFF to turn the eQ Boost on or off.
•
Press the soft button next to
function: eQ boost to go to icast
Track.
•
Press the soft button next to
▲ or
▼ to change the track of your iPod/
iPhone only if one of those two
devices are on and being used.
•
Press the soft button next to
function: iCast Track to go to Play
Pause.
•
Press the soft button next to Play/
Pause to play or pause your iPod/
iPhone only if one of those two
devices are on and being used.
•
Press the soft button next to
function: play/pause to go to back to
the Volume function.