26 of 39
Service Manual UK
Indesit
Company
English
DISMANTLING INSTRUCTIONS
SAFETY NOTES:-
1.
ENSURE THAT THE MACHINE IS UNPLUGGED BEFORE DISMANTLING
2.
BEWARE OF SHARP EDGES ON METAL PANELS AND PRESSED PARTS.
Access to all components are via the side panels, front plinth or the access panel in the base tray.
A
Plinth and Side Cheek Assembly
1.
Fully open the dishwasher door.
2.
Remove the screw securing each side cheek to the dishwasher cabinet.
3.
Carefully lean the dishwasher back slightly to remove the plinth side cheek assembly.
B
Worktop
C
Outer Door Panel
1.
Remove screws along each side.
2.
Disengage the front panel from the console locating lugs.
3.
Slide the outer door panel down to release from console locating lugs.
4.
When refitting carefully engage all fixing lugs on the console
.
1.
Remove the rear 2 fixing screws.
2.
Slide the worktop toward the
back to release the hooks
from the slots in the cabinet
side panels
(2 hooks each side).
3.
Lift up to remove. Hooks (4)
D.
Side Panels
1.
Remove the 6 screws securing
the side panel (3 front, 3 rear).
2.
Using a flat bladed screwdriver,
ease the panel over the location
pegs and lift away.
NOTE: Side clips at Base and
Upper Support.
E.
Front Access Flap
1.
Remove 2 securing screws.
2.
Release 2 locking clips.
3.
Carefully open flap releasing wiring harness
from top edge.
Note:
(The control module is attached to the flap).
4.
When refitting be careful not to trap any wires.
Release access flap locking tabs
Upper Support
Clip
Base Clip
(Rear)
