19
Replacing the light bulbs.
Turning the control to the
OFF
or position does not remove power to the light circuit.
Fresh Food Compartment—Upper Light
Unplug the refrigerator.
To align the control knobs properly,
note position of each knob for proper
reassembly, move both knobs all the
way to the left, then pull them off.
Remove light shield.
To remove this type of light shield,
pull it straight out.
To remove this type of light shield,
pull bottom of light shield down and
forward, then rotate the top up and off.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the light shield.
Replace the control knobs, move them to their
previous settings and plug the refrigerator back in.
b
a
3
2
1
FREEZ
ER
TEMPE
RATUR
E
COLD
OFF
COLDE
ST
1
3
5
*
7
9
FRESH FOOD
TEM
PERATURE
COLD
COLD
EST
1
3
5
*
7
9
Profile
*INITIA
L TEMP
ERATUR
E SETTIN
GS
ALLOW
24 HRS
. FOR TE
MP. TO
STABIL
IZE
Freezer Compartment
Unplug the refrigerator.
Remove the shelf just below light
shield.
Pull the plastic light shield, which is
underneath the ice compartment,
toward you.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the shield and
shelf, and plug the refrigerator back in.
3
2
1
1
3
5
7
9
Fresh Food Compartment—Lower Light
(on some models)
Some models have 2 lights. They are located
either behind the top drawer or right above the
top drawer (depending on your model).
Unplug the refrigerator.
If the light is behind the top drawer
you
will need to remove the drawer and
the shelf above it. See the
About
storage drawer removal
and
About the
refrigerator shelves and bins
sections.
Grasp the bottom of the light shield
and pull it forward and up.
After replacing with an appliance bulb of the
same or lower wattage, replace the shield. If the
light was behind the top drawer, you will need to
replace the drawer and the shelf above it. Plug
the refrigerator back in.
3
2
1
Freezer Compartment
(on some dispenser models)
If your model has this type of freezer light shield
follow these steps:
Unplug the refrigerator.
Remove the ice storage bin.
Remove screw at top of light shield.
After replacing with an appliance bulb of the
same or lower wattage, reinstall the shield and
ice storage bin, and plug the refrigerator back in.
3
2
1
Screw
Содержание CSM22GRD WW
Страница 28: ...28 Notes ...
Страница 29: ...29 Notes ...
Страница 60: ...28 Notas ...
Страница 61: ...29 Notas ...