Hotpoint CSM22GRD WW, Руководство пользователя

Страница: 13 / 64

13
About storage drawer removal.
(Not all features are on all models.)
About the refrigerator doors.
Drawer Removal
Drawers can easily be removed by tilting
up slightly and pulling past the
stop
location.
Remove the door bins from the fresh food door
before removing the drawer.
To remove the shelf above the top
drawer, first remove the top drawer and
any food on the shelf. Then tilt the shelf
up at the front and lift it up and out of
the tracks.
To replace the shelf, raise the shelf front
slightly and place the top hooks in the
lowest large track slots. Then lower the
front of the shelf until it is level.
To remove the drawers when the fresh
food compartment door cannot be
opened fully you need to roll the
refrigerator forward until the door can
be fully opened. In some cases this will
require moving the refrigerator to the
left as you roll it out.
When replacing the drawers, make
sure you slide them through both
drawer guides on the right or left
side depending on your model.
Drawer
Guides
Refrigerator Doors with Special Opening/Closing Feature
(on some models)
The refrigerator doors may feel different
than the ones you are used to. The special
door opening/closing feature makes sure
the doors close all the way and are
securely sealed.
When opening and closing the door you
will notice a
stop position. If the door is
opened past this
stop
point, the door
will remain open to allow you to load
and unload food more easily. When the
door is only partially open it will
automatically close.
The resistance you feel at the
stop
position will be reduced as the door
is loaded with food.
When the door is only partially open
it will automatically close.
Beyond this stop the door will
stay open.
Drawer
Guides
Left Side