Hotpoint CSM22GRD WW, Руководство пользователя

Страница: 15 / 64

15
Automatic Icemaker
On some models the icemaker is in back,
on others it is on the side.
The icemaker will produce eight cubes
per cycle—approximately 120 cubes in a
24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings
and other use conditions.
If the refrigerator is operated before
the water connection is made to the
icemaker, keep the feeler arm in the
STOP
(up) position.
When the refrigerator has been connected
to the water supply, move the feeler arm
to the
ON (down) position.
The icemaker will fill with water when it
cools to freezing. A newly-installed
refrigerator may take 8 to 12 hours to
begin making ice cubes.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the swing
of the feeler arm.
About the automatic icemaker.
A newly-installed refrigerator may take 8 to 12 hours to begin making ice.
Ice Storage Bin
Feeler arm in the
STOP (up) position
Feeler arm in the ON
(down) position
About the ice and water dispenser.
(On some models)
To Use the Dispenser
Press the rim of the glass gently against
the dispenser pad.
Select
CUBED ICE , CRUSHED ICE
(on some models) or
WATER .
The spill shelf is not self-draining. To
reduce water spotting, the shelf and its
grille should be cleaned regularly.
If no water is dispensed when the refrigerator is
first installed, there may be air in the water line
system. Press the dispenser pad for at least two
minutes to remove trapped air from the water
line and to fill the water system. To flush out
impurities in the water line, throw away the
first six glassfuls of water.
A light switch (on some models) turns
the
night light in the dispenser on or off.
The light also comes on when the
dispenser pad is pressed. The light in the
dispenser should be replaced with a 7
watt maximum bulb when it burns out.
CAUTION: Never put fingers or any other
objects into the ice crusher discharge
opening.
Spill Shelf
Icemaker
Ice Storage Bin
Feeler arm
in the
STOP
(up) position
Feeler arm
in the
ON
(down) position