Hotpoint Aquarius WD420G, Информация о сервисе

Страница: 21 / 32

21
Notes :
When first starting a test, a fault code could immediately appear
since the Hardware Key will detect the last fault the machine had
in the past.
In this situation it will be necessary to proceed as follows:
Switch off and unplug from the power supply for 30 seconds
and re-start test.
Faults Without Error Codes
If the motor is open circuit the machine will not fill or operate.
USB CABLE
This Hardware Key is supplied as part
of a kit (Part No. 5600260) which
includes a USB to RS232 serial cable.
This is used in conjunction with the
Washing Machine Doctor diagnostic
programme installed on EMIT units.
USB CABLE
RS232
Connector