Hotpoint Aquarius WD420G, Информация о сервисе

Страница: 23 / 32

23
Error Codes & Possible Causes
Note :
LCD display codes shown below are found on the Auto Test Plug Display - not on the machine.
LCD
Display
Code
Console LEDs
Possible Causes & Actions
LED 1 LED 2 LED 3 LED 4 LED 5
F01 OFF OFF OFF Flash OFF
Motor triac short circuit: check motor & module
connections
F02 OFF OFF Flash OFF OFF
Motor jammed / tacho detached: check motor
& module connections
F03 OFF OFF Flash Flash OFF
NTC short/open circuit: check thermistor & module
connections
F04 OFF Flash OFF OFF OFF
Pressure switch jammed on empty: check switch &
module
F05 OFF Flash OFF Flash OFF
Pressure switch jammed on full or pump blocked:
check pump & switch
F06 OFF Flash Flash OFF OFF N/A
F07 OFF Flash Flash Flash OFF
Heater relay stuck: check heater and module
connections
F08 Flash OFF OFF OFF OFF
Heater relay stuck: check pressure switch, heater &
module connections
F09 Flash OFF OFF Flash OFF Setup error: check eeprom
F10 Flash OFF Flash OFF OFF
Pressure switch not sensing: check switch & module
connections
F11 Flash OFF Flash Flash OFF
Pump cannot be activated: check pump, connections
& wiring
F12 Flash Flash OFF OFF OFF
No communication between cards: check module
connections
F13 Flash Flash OFF Flash OFF
High Temperature Rise in Drying: Reduced airflow,
check fan motor & filter for blockage.
F14 Flash Flash Flash OFF OFF
No Heat when Drying: Check one shot thermostat,
heater & module connections
F15 Flash Flash Flash Flash OFF Drying Heater Relay Fault: Possibly open circuit.
F16 OFF OFF OFF OFF Flash N/A
F17 OFF OFF OFF Flash Flash
Door lock error: check door, door lock & module
connections
F18 OFF OFF ON OFF OFF
Fault on Control Board: Check for damaged EEprom
and Microprocessor
LED 1
LED 2
LED 3
LED 4
When an error occurs,
the On/Off LED flashes rapidly
and one or more of the Option
LEDs will flash once per second
Refer to the chart below for
error code definitions.
LED 5 -