Hotpoint Aquarius DF62, Руководство пользователя

Страница: 24 / 27

EN - 20
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
P1 P2 P3 P4
Insufficient water
Make sure the water inlet tap is open and water
is flowing.
Separate the inlet hose from the tap and clean
the filter of the hose.
Contact for service if the error continues.
Continuous water input
Close the tap and contact for service.
Inability to discharge
water
Water discharge hose and filters may be
clogged.
Cancel the programme.
If the error continues, contact for service.
Contact for service.
Faulty heater and
heater senor
Contact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic card Contact for service.
10 . PRACTICAL INFORMATION
1. When the machine isn’t in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
2.
Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the programme and consumption table for more
information.
4.
Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Prewash programme when necessary.
6. Do not place the machine near a refrigerator because it will reach high temperatures.
7.
If the machine is located in an area that is at risk of freezing, close the tap, disconnect
the inlet hose from the tap and drain the water inside the hose and the machine
completely.