Hotpoint Aquarius DF62, Руководство пользователя

Страница: 19 / 27

EN - 1 5
7. THE CONTROL PANEL
1
4
2 3
Press the Power On/Off button (
1
), the End
Of Programme Indicator ( 3 ) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (
2
).
The light corresponding to the selected
program (4) will illuminate and the End Of
Programme Indicator will switch off.
The programme will start automatically
when the door is closed.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator ( 3 ) will illuminate to indicate the
salt chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
( 3 ) will illuminate to indicate the rinse aid
chamber needs filling.
7.1. Changing a Programme
Follow the steps below to change a
programme while in operation.
NOTE: Open the door slightly at first to
stop the programme before it is complete in
order to avoid water spillage.
7.2. Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
Open the door and press the
Programme Selection button to
select a new programme.
After closing the door, the new
programme will resume the
course of the old programme.
==
=
=
Press and hold the Programme
Selection button for 3 seconds. The
End Of Programme Indicator will flash
and the programme light will switch off.
The water discharge process will start
after the door of the machine is closed
and will continue for 30 seconds. When
a programme is cancelled, a buzzer will
sound 5 times and the End Of Programme
Indicator will illuminate.
When the door of your machine is
opened, the light corresponding
to the most recently selected
programme will illuminate.
7.3. Switching the Machine Off
=
When a programme is complete, the End Of
Programme Indicator will illuminate and a
signal will sound 5 times. You can then switch
your machine off using the Power On/Off
button.
Disconnect the plug and turn off
the water tap.
NOTE:
Do not open the door before a
programme is complete.
NOTE: Leave the door of your machine
slightly open at the end of a programme to
speed up drying.