background image

EN - 6

2.  INSTALLATION

2.1.  Machine positioning

When positioning the machine, place it in 

an area where dishes can be easily loaded 

and unloaded. Do not put the machine in an 

area where the ambient temperature falls 

below 0°C.

Read all warnings located on the packaging 

before removing the packaging and 

positioning the machine.

Place the machine close to a water tap 

and drain. Take into consideration that the 

connections will not be altered once the 

machine is in position.

Do not hold the machine by its door or 

panel.

Leave an adequate distance around the 

machine to allow ease of movement when 

cleaning.

Ensure the water inlet and outlet 

hoses are not squeezed or trapped 

and that the machine does not stand 

on the electrical cable while positioning.

Adjust the feet so the machine is level and 

balanced. The machine should be placed 

on flat ground otherwise it will be unstable 

and the door of the machine will not close 

properly.

2.2.  Water connection

We recommend fitting a filter to your water 

inlet supply in order to prevent damage to 

your machine due to contamination (sand, 

rust, etc.) from indoor plumbing. This will 

also help prevent yellowing and deposit 

formation after washing.

2.3.  Water inlet hose

 

WARNING:

 

Use the new water inlet 

hose supplied with your machine, do not 

use an old machine’s hose.

 

WARNING:

 Run water through the 

new hose before connecting.

 

WARNING:

 

Connect the hose 

directly to the water inlet tap. The pressure 

supplied by the tap should be a minimum 

of 0.03 MPa and a maximum of 1 MPa. If 

the pressure exceeds 1 MPa, a pressure 

relief valve must be fitted between the 

connection.

 

WARNING:

 

After the connections are 

made, turn the tap on fully and check for 

water leaks. Always turn off the water inlet 

tap after a wash program has finished.

An Aquastop water spout is available 

with some models. Do not damage it 

or allow it to become kinked or 

twisted.

2.4.  Drain Hose

Connect water drain hose directly to water 

dra-in hole or to the sink outlet spigot. This 

connection should be minimum 50 cm and 

maximum 110 cm from flor plane.

IMPORTANT: 

Items will not wash 

properly if a drain hose longer than 4 

m is used. 

Содержание Aquarius DF62




























Отзывы: