Hotpoint Ariston SXBHAE 920, Инструкция по эксплуатации, Страница: 31 / 213

How to make ice
1. Gently pull out the ice tray and Đll the ice
tray with water to the water level line.Then
carefully replace the ice tray horizontally.
2. When the ice cubes are ready, turn the knob
clockwise (turn to the end and release), the
ice cubes will drop from the ice tray into the
ice box.
* Picture is only for illustration
Notes:
• In order to make ice cubes quickly, set the freezer to the lowest temperature, or select the Quick
Freeze Mode.This will make the temperature of the freezer lower.
• Do not over - fi llwith wate . It may become dif fi cult to remove the ice cubes from ice tray and any
trickle of water into the ice box will make the ice cubes freeze together.
• If the knob is turned before the ice cubes are ready, any remaining water will trickle into the ice
box and cause the ice cubes to freeze together.
Ice tray
Water level line
2
）
vacation mode
Press the button to enter the vacation mode. Icon lights up,
the vacation mode will start, after locking.
．
3
）
Quick cooling mode
Press the button to enter the quick cooling mode. Icon lights up,
the quick cooling mode will start, after locking.
4
）
Quick freezing mode
Press the button to enter the quick freezing mode. Icon lights up,
the quick freezing mode will start, after locking.
6
）
Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber , freezing chamber region will make
flashing indication. Then press the button again to set the temperature, and you will hear one
beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the temperature wil
l change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New temperature setting
will
come into effect after locking.
5
）
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber , refrigerating chamber region
will make flashing indication. Then press the button again to set the temperature, and will hear
one beep. Setting scope is between 2°C and 8°C.Every time you press the button, the temperature will
change 1°C. After adjusting,the digital tube will keep flashing
for 5 seconds. New temperature
setting will come into effect after locking.
31
……………………………………………………………………………………………………