Hotpoint Ariston SXBHAE 920, Инструкция по эксплуатации, Страница: 24 / 213

24
• Appliances could have special compartments (Fresh Food Compartment, Zero Degree Box,...). In
case not differently specified in the specific booklet of product, they can be removed, maintaining
equivalent performances.
• Positioning of the shelves in the refrigerator has no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to ensure proper air circulation (food should not
touch each other and distance between food and rear wall should be kept).
• You can increase storage capacity of frozen food by removing baskets and, if present, Stop Frost
shelve, maintaining an equivalent energy consumption.
• Damaged gasket must be replaced as soon as possible.
• High energy class products are fitted with highefficiency motors that remain operational for
longer, but have a low power consumption. Do not worry if the engine continues to run for longer
periods.
ELECTRICAL SAFETY
THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET
• Before switching on, make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate. This product is designed to operate on 220 –240V AC; 50Hz.
Connection to any other power source may damage the unit.
• This product may be fitted with a non re-wireable plug. If it is necessary to change the fuse in the
plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must
not be used until a suitable replacement is obtained.
• If the plug has to be changed because it is not suitable for your socket, or becomes damaged in
any way, it should be cut off and an appropriate plug fitted following the wiring instructions. This
should be carried out by a qualified electrician. The plug removed must be disposed of safely, as
insertion into a 13 Amp socket is likely to cause an electrical hazard.
TRANSPORTATION AND HANDLING
For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the base and rear
corners of cabinet. Lift the refrigerator carefully. Never use the door handles for lifting. To move the
refrigerator on a flat level surface, tilt it slightly backwards and push backwards.
This unit is heavy and could cause injury –ensure there are adequate people present to
move the appliance.
INSTALLING AND SWITCHING ON YOUR
APPLIANCE
• Operating voltage for your appliance is 220-240V at 50Hz.
• Before plugging in the power supply, ensure that the voltage on the rating label corresponds to the
working voltage of your electrical system in your home.
• Insert the plug into an efficient Ground(Earth) connection. If the socket has no Ground(Earth)
contact or the plug does not match, we suggest you call an authorised electrician for assistance.
• Place your appliance in an area that is not exposed to direct sunlight.
• Your appliance should be placed at least 10cm away from stoves, ovens and other heating cores.
• This appliance should never be used outdoors or left in the rain.
• When your appliance is placed next to a chest freezer or freezer, there should be at least 10cms
between them to prevent humidity on the outer surface.