22
REPLACING THE WALKING BELT
When the walking belt becomes worn, it should be replaced. The walking belt will need to be replaced after every
12,000 to 15,000 miles (19,000 to 24,000 kilometers). Please see the back cover of this manual to order a new
walking belt.
REPLACING THE WALKING PLATFORM
When both sides of the walking platform become worn, the walking platform should be replaced. The walking
platform will need to be replaced after every 12,000 to 15,000 miles (19,000 to 24,000 kilometers). Please see
the back cover of this manual to order a new walking platform. Follow the instructions on page 21 to replace the
walking platform.
HOW TO LUBRICATE THE WALKING BELT
When the treadmill is used regularly, lubricate the walking belt every six months. If additional lubricant is needed,
see the back cover of this manual.
To lubricate the walking belt,
remove the key from the console and
unplug the power cord.
Pull the left and right edges of the walking belt
toward the idler roller, until the seam of the walking belt is above the
idler roller.
Avoid pinching your fingers.
Open one tube of belt lubricant. Lift the right edge of the walking belt.
Apply one half of the lubricant to the walking platform in a zigzag pat-
tern as shown. Apply the lubricant as close to the center of the walking
platform as possible, but
leave an unlubricated strip about 2 in. (5
cm) wide beneath the right edge of the walking belt.
Lift the left
edge of the walking belt and apply the other half of the lubricant in the same way. Then, firmly rub the top of the
walking belt to transfer the lubricant from the walking platform to the walking belt.
Pull the edges of the walking belt toward the idler roller, until the seam of the walking belt is above the drive
roller. Repeat the steps above with a second tube of lubricant.
Seam
