HOSSEVEN KH.2545, Инструкция по эксплуатации

Страница: 5 / 20

IN A EMERGENCY
If there is a fi re in the flue connection :
a) Close the loading door and the ash tray door
b) Close the comburent air registers
c) Use carbon dioxide ( CO
₂ powder ) extinguishers to put out the fire
d) Request the immediate intervention of the Fire Brigade
With thermal insulation in accordance with the regulations regarding energy saving, the heated volume is greater. With temporary
heating, in the event of interruptions which last more than 8 hours, the heating capacity is reduced by about 25%.
The declared technical data have been achieved by burning beech wood class “A1” according to the requirement UNI EN ISO 17225-
5 and wood moisture content less than 20%. By burning a different kind of wood the effciency of the product itself could change and
some specifc adjustments on the appliance could be needed.
TECHNICAL DESCRIPTION
The cookers of Hosseven A.S. are suitable to cook on the grill and on the oven and to heat living spaces for some periods or to support
an insuffcient centralized heating system. They are ideal for holiday apartments and weekend houses or as an auxiliary heating system
during the whole year. As fuel, wood logs is used.
The appliance works as an intermittent operating appliance.
The hearth is totally sheathed with single cast iron sheets and it is endowed with a pre-adjusted tertiary air for a better combustion.
Inside there is a thick
flat grate. The hearth is equipped with a panoramic door with ceramic glass (resistant up to 700 ° C) and outside
tempered. This allows a wonderful view on the burning flames . Furthermore, it is thus avoided the output of sparks and smoke.
The heating of the environment is made by irradiation : through the panoramic glass and the external hot surfaces of the stove,
the heat is radiated into the environment.
The cooker is equipped with controls of primary and secondary air by which it is adjusted the combustion air.
CENTRAL HEATING SYSTEM
Adjust the draught thermostat (Picture-08 no.14) desired temparature ( for example 50 ° C..60 ° C..), push the chimmny flap (Picture.10
no.19) to close. Secondary air (Picture-06/09 no.5) must be open. Keep the draught thermostat primary air inlet open, keep the other
air inlets closed position during central heating period.
TECHNICAL DATA
KH.2545
Defnition in accordance with EN 12815
Constructive system 2
Nominal power in kW 24
Effciency in % 85
Water content in liter 30
Operating temperature max. in ° C 90
Operating pressure max. i n bar 2,5
Smoke outlet diameter in mm 130
Chimney height ≥ (m) - dimension (mm) 4 - 200x200 or
Ø
200
Chimney draught in Pa (mm H2O) 12 (1,2 mm H ₂ O)
Hourly wood consumption in kg / h (wood with 20% humidity) 2,3
CO measured at 13% oxygen in % 0,08 - (1000 mg/Nm3)
Exhaust gas emission in g/s – wood 7,5
Exhaust gas temperature in °C - wood 280
Hearth opening size in mm (W x H) 230 x 210
Hearth size in mm (W x H x D) 285 x 405 x 445
Oven size in mm (W x H x D) 440 x 290 x 440
Type of grill Movable - flat
Height in mm 846
Width in mm 1044
Depth in mm 663
Net Weight in kg 220
±
%5
Fire prevention safety distances Chapter FIRE SAFETY
5
DO NOT PUT OUT THE FIRE WITH WATER.
When the flue stops burning, have it checked by a specialist to identify any cracks or permeable points.
!