HOSSEVEN KH.2545, Инструкция по эксплуатации

Страница: 12 / 20

Approximate combustion value
Required quantity in
relation to 1 kg of
dry wood
Fuel Unit kcal/h kW
Dry wood (15% humidity) kg 3600 4.2 1,00
Wet wood (50% humidity) kg 1850 2.2 1,95
Wood briquettes kg 4000 5.0 0,84
Brown coal briquettes kg 4800 5.6 0,75
Normal anthracite kg 7700 8.9 0,47
Coke kg 6780 7.9 0,53
Natural gas m3 7800 9.1 0,46
Naphtha L 8500 9.9 0,42
Electricity kW/h 860 1.0 4,19
CAST IRON COOKING PLATE AND RINGS
IMPORTANT: to avoid rust DO NOT forget pots or pans on the cold cooking plate. This would create rust rings, unpleasant to see
and diffcult to remove. The cast iron cooking plate and the cast iron rings needs to be periodically cleaned by using sandpaper (grain
150)
without touching the enamelled parts .
NgLIsH
MAINTENANCE OF THE OVEN (where existing)
To avoid the possible forming of rust it is recommended:
- To let the steam getting out of the oven to reduce the formation of any condensation by opening the door briefly and carefully (1 or 2
times, or more often in case of cooking food very humid and with longer cooking times);
- Remove the food from the oven once cooked. Letting the food to chill in the oven at a temperature below 150
° C results in the
forming of condensation;
- After cooking, leave the oven door partially open to dry out any condensation;
- In case humidity formed inside the oven, we suggest you to treat with neutral vaseline the inside part of the cast iron door (where
existing).
- Repeat the treatment with the neutral vaseline on the inside part of the cast iron door every 3-6 months, depending of the
frequency of the use of the oven;
- In case of presence of rust on the inside part of the cast iron door, remove the rust by using abrasive material and then treat the
cast iron surface with neutral vaseline.
In order to ensure the quality of the foods that are cooked in the oven, the internal parts of the cast iron doors have Not been treated
with any product.
CALCULATION OF THE THERMAL POWER
There is not an absolute rule for calculating the correct necessary power. This power is given according to the space to be heated,
but it depends also largely on the insulation. On an average, the calorifc value necessary for a properly insulated room is
30 kcal/h per
m3 (for an external temperature of 0 ° C).
Given that 1 kW corresponds to 860 kcal/h , it is possible to adopt a value of 35 W/m3 .
Let’s suppose one wishes to heat a room of 150 m3 (10 x 6 x 2.5 m) in an insulated apartment. In this case, it is necessary to have
150 m3 x 35 W/m3 = 5250 W or 5,25 kW. As main heating, a 8 kW device is therefore suffcient
12
PRODUCTS MADE OF NATURAL STONE (If present)
Natural stone has to be cleaned with very thin abrasive paper or with an abrasive sponge. Do NOT use any cleanser or fluid .
VARNISHED PRODUCTS (If present)
After some years of product use a change in the varnished details colour is totally normal. This is due to the considerable temperature
range the product is subject to whenever in use and to the varnish ageing of time passing by.
!
ATTENTION : before any possible application of the new varnish, do clean and remove all the traces from the surface which has to
be varnished.
ENAMELLED PRODUCTS (If present)
For the cleaning of enamelled surfaces use soap water or not aggressive and not chemically abrasive detergents.
.let soapy water or any cleanser dry but remove them immediately.
do NOTDO NOT use sandpaper or steel wool After the cleaning
CHROMIUM-COMPONENTS (If present)
If the components become bluish due to overheating, this can be solved with a suitable product for cleaning. DO NOT use abrasives or
solvents.