manualshive.com logo in svg

Hoshizaki Serenity KMS-2000MLJ, Инструкция по эксплуатации

Поделиться
Скачать
Hoshizaki Serenity KMS-2000MLJ Скачать руководство пользователя страница 3

3

CONTENTS

Important Safety Information ................................................................................................. 4
I. Specifications ...................................................................................................................... 6

A. Electrical and Refrigerant Data ..................................................................................... 6

1. KMS-2000MLJ ......................................................................................................... 6
2. SRK-20J/3 ............................................................................................................... 6

B. Dimensions/Connections .............................................................................................. 7

1. KMS-2000MLJ ......................................................................................................... 7
2. SRK-20J/3 ............................................................................................................... 8

II. Installation and Operating Instructions .............................................................................. 9

A. Location ........................................................................................................................ 9

1. Icemaker .................................................................................................................. 9
2. Remote Condensing Unit ....................................................................................... 10

B. Checks Before Installation ............................................................................................11

1. Icemaker .................................................................................................................11
2. Remote Condensing Unit ........................................................................................11

C. How to Remove Panels ............................................................................................... 12

1. Icemaker ................................................................................................................ 12
2. Remote Condensing Unit ....................................................................................... 12

D. Installation of the Icemaker ......................................................................................... 13

1. Setup ...................................................................................................................... 13
2. Water Tank Removal .............................................................................................. 15

E. Installation of the Remote Condensing Unit ................................................................ 19

1. Setup ...................................................................................................................... 19
2. Line Set ................................................................................................................. 19
3. Line Set Installation ............................................................................................... 20

F. Electrical Connection ................................................................................................... 22
G. Water Supply and Drain Connections ......................................................................... 25
H. Final Checklist ............................................................................................................. 27
I. Startup .......................................................................................................................... 28

III. Cleaning and Maintenance  ............................................................................................ 30

A. Cleaning and Sanitizing Instructions ........................................................................... 30

1. Cleaning Procedure ................................................................................................ 31
2. Sanitizing Procedure - Following Cleaning Procedure ........................................... 32

B. Maintenance ................................................................................................................ 33
C. Preparing the Icemaker for Periods of Non-Use .......................................................... 34

IMPORTANT

This manual should be read carefully before the icemaker is installed and operated. 
Read the warnings and guidelines contained in this booklet carefully as they 
provide essential information for the continued safe use and maintenance of the 
icemaker. Retain this booklet for any further reference that may be necessary.

Содержание Serenity KMS-2000MLJ





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды