15
B. Startup
WARNING
All parts are factory-adjusted. Improper adjustments may adversely affect safety,
performance, component life, and warranty coverage.
IMPORTANT
At startup, there is a 2-minute delay before the compressor starts.
1) Plug the appliance into the electrical outlet.
WARNING! If you have to slide the
appliance back for a built-in installation, make sure you do not damage or pinch
the power cord.
2) Press and hold the power button for 2 seconds to turn on the appliance. See Fig. 3.
3) Allow the appliance to cool down prior to stocking it.
C. Cabinet Temperature
1. Temperature Display
The cabinet temperature is displayed on the control panel. The display is in °F.
2. Adjusting the Temperature Setpoint
If necessary, adjust the temperature setpoint temperature as follows:
1) To change the temperature setpoint, press and hold the "P" button until the compressor
icon flashes.
2) Press the "-" or "+" button until the desired value is displayed.
3) Press the "P" button to save the temperature setpoint and return to the cabinet
temperature display. If no button is pressed for 15 seconds after selecting the setpoint,
the display returns to the current cabinet temperature and the temperature setpoint is
saved.
The temperature setpoint is adjustable between 34°F and 52°F. The factory default is
39°F.
Fig. 3
Control Panel
Compressor
Display
Defrost
Evaporator Fan
Power
Button
"P"
Button
"+"
Button
"-"
Button
Alarm
°C
°F
