10
D. Setup
1. Install the Top Trim
To achieve a built-in look when installing in a cabinet application, the top trim can be
installed. Two top trims are included; use the one of the appropriate height to fill the gap
between the top of the unit and bottom of the counter in your installation. To install the top
trim, follow the directions below.
1) Remove the plastic film from the top trim.
2) Clean the appliance's top panel with a clean soft cloth using a mild soap to remove any
oil or dirt. Dry the top panel thoroughly with a clean soft cloth.
3) Peel off the liner from the double-sided tape on the top trim.
4) Attach the top trim to the top panel.
5) Apply firm pressure along the base of the trim to secure it in position.
2. Position and Level the Appliance
Position the appliance in its permanent location. Level the appliance by adjusting the
legs.
NOTICE!
Do not remove the legs or rollers. The legs and rollers are necessary to
maintain proper clearance for airflow.
3. Adjust the Shelves
The appliance comes with 2 lower shelves and 1 upper shelf. Adjust shelf positions as
needed.
Fig. 2
Top Trim: Use the one of the
appropriate height for your installation
Rollers
Leg
Leg
