manualshive.com logo in svg

Hoshizaki FM-120KE-50-HC, Руководство по обслуживанию

Поделиться
Скачать
Hoshizaki FM-120KE-50-HC Скачать руководство пользователя страница 30

27

Note: 

1.  The display shows the next item if the ice button is pressed before one item appears in 

the display.

2.  The display mode is cancelled if the maintenance A button is released.

3.  The software version is displayed repeatedly while the maintenance A button is pressed. 

Release the maintenance A button to cancel the display mode.

a) Compressor Operating Hours

The display shows the compressor operating hours in six digits divided into three parts (two 

digits for 2 seconds each time).

Then,  “-  -”  appears  in  the  display  (to  show  the  end  of  the  compressor  operating  hours 

display mode).

e.g. 3527 hours = “00”, “35”, “27”, “- -”

b) Cycle Time

The display shows the cycle time in four digits divided into two parts (first minutes then 

seconds, for 2 seconds each time) from the latest record (5 records at maximum).

Then, “- -” appears in the display (to show the end of the cycle time display mode).

If no cycle time is recorded, the display shows “- -” only.

Minutes are indicated as follows:

o 0 to 9 = 0 to 9 minutes
A 0 to 9 = 10 to 19 minutes
b 0 to 9 = 20 to 29 minutes
C 0 to 9 = 30 to 39 minutes
d 0 to 9 = 40 to 49 minutes
E 0 to 9 = 50 to 59 minutes

Seconds are indicated as 0 to 5 0 to 9.

e.g. o9 48 = 9 minutes 48 seconds  b7 36 = 27 minutes 36 seconds

By using the freeze cycle time, 

approximate ice production capacity

 can be calculated.

Series

Approximate ice production capacity (kg/d)

FM-80

60,000 / cycle time (sec) 

FM-120
CM-110
FM-150
CM-140 
FM-170 
FM-300 
FM-480 
FM-600
FM-750 

85,000 / cycle time (sec)

FM-1000 
FM-1200

This is just an approximate capacity. The actual capacity depends on ambient temperature, 

water temperature, voltage and frequency.

Содержание FM-120KE-50-HC
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды