15
H. Startup
CAUTION
1. All parts are factory-adjusted. Improper adjustments may result in failure.
. If the unit is turned off, wait for at least 3 minutes before restarting it to
prevent damage to the compressor.
1) Open the water supply line shut-off valve.
) Make sure the power switch is in the "OFF" position. Plug the unit into the electrical
outlet. If you have to slide the unit back for a built-in installation, make sure you do not
damage or pinch the water supply and drain connections, or the power cord.
3) If required by sanitation code in your area, seal the perimeter where the machine
touches the floor with approved caulk compound in a smooth and easily cleanable
manner.
4) Move the power switch to the "ON" position to start the automatic icemaking process.
5) Once the unit starts to produce ice, allow it to run for another 30 minutes.
6) Move the power switch to the "OFF" position.
7) Remove the ice produced, then clean the storage bin using a neutral cleaner. Rinse
thoroughly after cleaning.
8) Move the power switch to the "ON" position to start the automatic icemaking process.
