Border discs
The border discs prevent the formation of dams
at both sides of the machine.
Tiger MT border disc
Setting
Adjust the border discs to the conditions of use
in the field.
Depth setting
The discs should run along on the surface.
They must not stop running to avoid abrasion
on one side.
¾
Loosen the four clamping screws (A) to this
end, adjust the working depth of the discs
and tighten the clamping screws again.
A
Border discs height adjustment
Angle of attack adjustment of the discs
The angle of attack of the discs must be ad-
justed to the working speed and the amount of
earth and harvest residues thrown up.
¾
Remove the screw (B) and loosen screw (C).
¾
Set the desired angle and tighten the screws
(B) and (C) again.
B
C
Border disc angle adjustment
Tiger 3 MT
¾
Fold down the border discs before use when
changing from the transport to the working
position.
¾
Remove the bolt (D) for this purpose and fold
down the border disc.
¾
Insert the bolt (D) again and secure it with
the cotter pin.
D
Folding the border disc
60
