CHAPTER 3: CONFIGURATION 01 SEPTEMBER 1998 PAGE 20
HE500OCS050/051 User Manual
e.
Set FKeys Mode
The user keys on the keypad can be configured to operate in one of two ways. When a user key is
pressed it can TOGGLE the point associated with the key or it can MOMENTARILY turn the point ON
when the key is pressed. Make a selection by pressing
Enter
, then use the and keys. Press
Enter
once your selection has been made.
Note: If the selection has been changed, the unit will stop executing the ladder code for up to 10
milliseconds while the key state is saved in non-volatile memory.
f.
Set RS232 Mode
What the screen display looks like
θ
The Set RS-232 Mode screen allows the mode of the serial port to be set. Press
Enter
, then use the
and keys to toggle between the options. Press the
Enter
key to save the option. The CSCAN mode
allows Cscape to connect to the serial port for uploads, downloads, monitoring and control. The
Firmware Update mode allows a Horner Electric (APG) firmware update and configuration utility to be
used. Pressing
Enter
will save the selected mode. The firmware is ready to download when a solid “U”
is displayed.
Note: If the port setting is changed, the unit will stop executing the ladder code for up to 10 milliseconds
while the setting is saved in non-volatile memory.
g.
Set Network ID
What the screen display looks like:
θ
In the Set Network ID screen, the user is able to set the Network ID number. Each unit should have a
unique ID number for the network. Press
Enter
to select “Network ID.” Use and to increment or
decrement the digit under the cursor. If the node number does not need to be changed, press
Enter
and
the unit will go back to displaying the menu screen. If you want to save the change to the node number,
press
Enter
.
Note: The node number will be saved and the unit stops executing for one second while a series of
network checks are performed with the new network ID.
h.
Set Contrast
What the screen display looks like
θ
The Contrast screen allows the contrast of the LCD display to be adjusted. By pressing the key, the
display gets darker, and the numbers increment. By pressing the key, the display gets lighter, and the
numbers decrement. Once the desired contrast is selected, press the
Enter
key and
Esc
to return to the
configuration menu.
Note: If the contrast setting is changed, the unit stops executing the ladder code for up to 10 milliseconds
while the setting is saved in non-volatile memory.
Use
↑↓
to adjust
contrast:
∈∈∈∈∈∈
Use
↑↓
to change
RS232 md: CSCAN
Network OK? Yes
Network ID: 37
