HORNER HE500OCS050, Руководство пользователя

Страница: 19 / 21

PAGE 19 01 SEPTEMBER 1998 CHAPTER 3: CONFIGURATION
HE500OCS050/051 User Manual
fault codes.
Table 3.1 – Fault Codes
Code Description
01 Bios checksum error
02 Firmware checksum error
04 User program checksum error
08 RAM test failed
10 Duplicate network ID error
20 Invalid network ID error
40 I/O configuration error
80 Network not usable error
Net Update
Global data is sent every time it's state changes. If it has not been sent in the time defined by the network
update time-out, it is sent at that time. The network time-out is the maximum time that can elapse without
broadcasting network data. If the data changes every scan this is the minimum time that can elapse
before data is transmitted. If the time-out is set to zero, the data is sent only on change of state.
b. View Registers
What the screen display looks like
θ
The View Registers screen allows the user to view the state of internal PLC registers. Using the and
keys, the different data types can be displayed. The data types include Inputs (I), Outputs (Q),
Temporary (T), Global Network Inputs (IG), Global Network Outputs (QG), Timers and Counters (TC),
Key Bits (K) and System (S). Pressing
Esc
will return to the configuration menu.
c. View I/O Slots
What the screen display looks like
θ
The View I/O Slots screen allows the I/O device on the unit to be displayed. Using the and keys,
position the arrow next to the item to configure. Press
ESC
to return to the configuration menu.
d. View Char Set
What the screen display looks like
θ
Press
Enter
, then use the and keys to scroll through the character set. Press
Enter
, then
Esc
to
return to the configuration menu.
I1: 01010101
Q1: 00011100
1: 8I 8Q 24VDC
K: Keypad (8)
Use
↑↓
to view
Next char: 8=
↓