Tail Gear Installation
1. Install the tail gear springs
(A)
as shown.
2. Install the opposite ends of the tail gear springs to the tail gear assembly (
B
).
3. Secure the tail gear assembly into place using the included M3 x 30mm screw
(C)
in the front hole and the M3 x 10mm screw
(D)
for the rear hole. Tighten
the two screws into place using a 2.0 hex wrench.
When needed, disassemble in reverse order.
EN
7
A
C
M3 x 30mm
D
M3 x 10mm
B
