16
EN
DE
FR
IT
7. Place the nylon nut on the back of the prop shaft. Make sure the small brass
washer is between the nylon nut and the gearbox. Spin the prop and spur
gear counterclockwise. The nylon nut will thread onto the prop shaft.
8. While holding the nylon nut in place, gently turn the spur gear
counterclockwise to ensure the nut is snug. Make sure not to over-tighten as
this will cause binding in the gearbox and reduce performance.
9. Tape the fuselage back together with clear tape.
Replacement Parts
HBZ4904 . . . . . . . . . . . Prop Shaft
HBZ4913 . . . . . . . . . . . Decal Sheet
HBZ4918 . . . . . . . . . . . Main Landing Gear Set
HBZ4920 . . . . . . . . . . . Main Wing
HBZ4921 . . . . . . . . . . . Pushrods with Accessories
HBZ4929 . . . . . . . . . . . Gearbox without Motor
HBZ4930 . . . . . . . . . . . Gearbox with Motor
HBZ4931 . . . . . . . . . . . Complete Tail
HBZ4952 . . . . . . . . . . . Fuselage with Electronics
HBZ4967 . . . . . . . . . . . Bare Fuselage
EFLB1501S25. . . . . . . . 150mAh 1S 3.7V Li-Po Battery
EFL9051 . . . . . . . . . . . . 130mm x 70mm Prop with Spinner (2)
PKZ3341 . . . . . . . . . . . 2.4GHz DSM2/DSMX Transmitter
PKZUA3352 . . . . . . . . . Receiver/ESC Board
Optional Parts
EFLA209 . . . . . . . . . . . . Foam-Safe CA (medium)
EFLA208 . . . . . . . . . . . . Foam-Safe Activator
EFLC1004AC . . . . . . . . Celectra 4-Port Charger with AC Adapter
