
9
K N O W Y O U R T R E A D M I L L
T
SC2
CONSOLE
GRIP PULSE
HANDLEBARS
RUNNING BELT
TRANSPORT WHEEL
SIDE RAIL
MOTOR COVER
WATER BOTTLE
HOLDER
UPRIGHT
SUPPORT
TOUCH PAD
ROLLER
END CAP
S.Class Series
32
M A I N T E N A N C E P R O C E D U R E S
Cleanliness of your Horizon Fitness treadmill and its operating environment will
keep maintenance problems and service calls to a minimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule
be followed.
AFTER EACH USE (DAILY)
Turn off the treadmill with the on/off switch, and unplug the power cord from the
wall outlet.
WARNING!
To remove power from the treadmill, the power cord must be disconnected from
the wall outlet.
•
Wipe down the running belt, deck, motor cover, and console casing with a damp
cloth. Never use solvents, as they can cause damage to the treadmill.
•
Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
•
Make sure the power cord is not underneath the treadmill or in any other area
where it can become pinched or cut.
•
Check the tension and alignment of the running belt. Make sure that the tread-
mill belt will not damage any other components on the treadmill by being mis-
aligned.
EVERY WEEK
Clean underneath the treadmill, following these steps:
•
Turn off the treadmill with the on/off switch, then unplug the power cord at the
wall outlet.
•
Fold the treadmill into the upright position, making sure that the lock latch is
secure.
•
Move the treadmill to a remote location.
•
Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the treadmill.
•
Return the treadmill to its previous position.
EVERY MONTH
•
Inspect all assembly bolts of the machine for proper tightness.
EVERY YEAR
•
It may be necessary to rewax your treadmill running deck and belt once a year
to maintain optimal performance of your treadmill. Please contact Horizon Fitness
with questions about applying wax to your treadmill.
Warning! Only use paraffin wax provided by Horizon Fitness
!
•
Lubricate the air shocks with teflon based spray.
s.class MANUAL v1.0.qxd 2/19/2003 10:49 AM Page 10