4. Remove the console assembly from the console mast (AC02) by removing the
console mast covers on both the left and right side.
5. Remove the rear (closet to the back of the treadmill) 45 mm bolt and 13 mm nut
that attaches the console assembly to the console mast (AC01).
6. Remove the console mast plug (P30) from the console mast.
7. Attach the new console cable to the existing cable and fish the new cable through
the console mast.
8. Once the new console cable is installed through the console mast, connect the
plugs to the lower board and upper boards.
9. Attach the console assembly to the console masts with the 45 mm bolts and 13 mm
nut and attach the console mast covers.
10. Attach the back panel on the upper board.
11. Attach the motor cover, ensuring that the console cable is not being pinched.
66
