Horizon Fitness CT12.1, Руководство пользователя

Страница: 4 / 27

6 7
ASSEMBLY STEP 2
BOLT (A)
20 mm
Qty: 6 SPRING WASHER (B)
8.2 mm
Qty: 6 ARC WASHER (C)
8.2 mm
Qty: 6
HArDWArE BAG 1 CONTENTS :
BOLTS (A)
MAIN
FRAME
BOOT
CONSOLE MAST
SPRING
WASHERS (B)
ARC WASHERS (C)
MAIN FRAME BRACKET
CONSOLE CABLE
LEAD WIRE
ASSEMBLY STEP 1
A
Open hardware bag 2 .
B
With the CONSOLe upside down, attach the
CONSOLe maSt CapS to the CONSOLe
using 4 bOLtS (e) and 4 SpriNg
waSherS (b) .
BOLT (E)
15 mm
Qty: 4 SPRING WASHER (B)
8.2 mm
Qty: 4
HArDWArE BAG 2 CONTENTS :
BOLTS (E)
SPRING WASHERS (B)
CONSOLE (UPSIDE DOWN)
CONSOLE MAST CAP
A Cut the yellow banding straps and lift the
running deck upward to remove all contents
from underneath the running deck.
B Open hardware bag 1 .
C
Slide maiN frame bOOt up CONSOLe
maSt . Place right CONSOLe maSt over
maiN frame braCket .
D
Pull Lead wire through right CONSOLe
maSt . After pulling the Lead wire through
the mast, the top of the CONSOLe CabLe
should be located at the top of the mast. Detach
and discard
Lead wire .
NOTE: Do not pinch
CONSOLe CabLe when
placing the mast onto the maiN frame
braCket .
E
Attach CONSOLe maSt to maiN frame
braCket using 3 bOLtS (a) , 3 SpriNg
waSherS (b ) and 3 arC waSherS (C) .
F Slide
maiN frame bOOt
down over
maiN
frame braCket
.
g
Repeat steps D–F on other side.
NOTE: The console mast caps are marked with an
L if they are to be used on the left-hand side of the
treadmill or an R if they are to be used on the right-
hand side of the treadmill. If the console mast caps
are assembled on the incorrect side of the treadmill,
the unit will not assemble correctly.
CT9.1-CT12.1-OM-rev1.5.indd 6-7 12/23/09 11:06 AM