manualshive.com logo in svg

Horizon Fitness CST 3.5, Руководство по обслуживанию, Страница: 7 / 67

Поделиться
Скачать
Horizon Fitness CST 3.5 Скачать руководство пользователя страница 7

7

SPARE 

PARTS

REPLACEMENT

TROUBLESHOOTING

ENGINEERING

MODE

WIRING 

DIAGRAMS

AND 

SCHEMA

TICS

VOL

TAGE 

CHECKS

AND

LED 

DIAGNOSIS

5-STEP

DIAGNOSTIC

PROCESS

PROPER

HEART 

REA

TE 

USAGE

MAINTENANCE

RECOMMENDED

TOOLS

SAFETY 

INSTRUCTIONS

W

ARRANTY

 

Cleanliness of your Horizon Fitness treadmill and its operating environment will keep maintenance 

problems and service calls to a minimum.  For this reason, Horizon Fitness recommends that the following 
preventive maintenance schedule be followed.

After Each Use

 

• Turn off the treadmill with the on/off switch, and unplug the power cord from the wall outlet.

 

• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.  Never use 

solvents, as they can cause damage to the treadmill.
 

• Inspect the power cord.  If the power cord is damaged, contact Horizon Fitness.

 

• Make sure the power cord is not underneath the treadmill or in any other area where it can become 

pinched or cut.
 

• Check the tension and alignment of the running belt.  Make sure that the treadmill belt will not 

damage any other components on the treadmill by being misaligned.

Every Week

Clean underneath the treadmill, following these steps:
 

• Turn off the treadmill with the on/off switch. 

 

• Unplug the power cord at the wall outlet.

 

• Fold the treadmill into the upright position; making sure that the foot lock latch is secure.

 

• Move the treadmill to a remote location.

 

• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the 

treadmill.
 

• Return the treadmill to its previous position.

Every Month

 

• Inspect all assembly bolts of the machine for proper tightness. 

Each 3-6 months

 

• Add lubrication to deck and running belt.  Use lubrication provided by Horizon Fitness only!

 

• Lubricate the air shocks with a Teflon based spray.

 

Preventative Maintenance Procedures

WARNING

To remove power from the treadmill, the power cord must be disconect-

ed from the wall outlet.      

                    

MAINTENANCE

Содержание CST 3.5




































































Отзывы:

Нет отзывов