manualshive.com logo in svg

Horizon Fitness CST 3.5, Руководство по обслуживанию, Страница: 67 / 67

Поделиться
Скачать
Horizon Fitness CST 3.5 Скачать руководство пользователя страница 67

67

NEW MOTOR CONTROL BOARD

30A 120/240VAC

JQX-15FS

-A

COIL 12VDC

C                US

CQC

CHINA

AC1

AC2

BL

RED

LED 5

Speed Sensor

Optic Sensor

Console Cable

Elevation

Power

LED 1

Motor Wires

A mid-production change involving the motor control board has occurred effective (11/01/05):  

Please check the serial number (Pictured Below) to verify the production change.

This change will affect the service guide in the following ways:

 

· The old motor control board has five diagnostic LED’s and the new has only one LED, which is the equivalent to LED 1.  

Therefore a complete LED diagnostic cannot be completed.

 

· A wiring diagram was not included for the new style motor control board (supplied with this supplement).

 

· Instructions for the motor control board replacement were not included in this service guide (supplied with this 

supplement).

All other information in the service guide should be valid for both the new and old motor control boards.

  

TM165A05110001     

DATE

0511

YEAR OF PRODUCTION

MONTH OF PRODUCTION

Units with .75 HP Drive Motors will not be affected by this production change. (PST8 and 5.T)

Содержание CST 3.5




































































Отзывы:

Нет отзывов